3", 5", 7" 9" 10" and the Huge D8 HB 12" and 16" Wide-angle viewing Super Bright Outdoor Visible  LED Seven Segment Displays
Build your own School's Sports Scoreboards and Fun Run Event timers quickly and inexpensively using our 257mm 7 Segment LED Displays. Two LED types are offered for displays from 3" to 10". Super Bright LEDs for visibilityover long distances in direct sunlight. Wide-angle 600mcd LEDS are suited to indoor applications.
Outdoor Sports Timing, Score Boards and Gas Station Price Signs where visibility is required over a larger sector will benefit from the new generation 5,000mcd 130degree wide angle LEDs used in the D8 - HB LEDs. For super large indoor applications the D8 Standard versions offer 600mcd Wide angle LEDs. Here, you will also find MUXed and DeMUXed Display Drivers, Large Scale Clocks plus Manufacturing, Retail and Safety Solutions. 
Products may be supplied as DIY kits or fully tested ready-to-use modules.

Overseas Clients:  Don't Pay Too Much for your kits !!! Ensure Prompt Delivery
Ask for special EXPORT (GST Exempt Pricing) and airpost charges. Use the Contact Form on the "Contact Us" page.

(+ postage of $12.50)

D8 HB 300 12" (approx 300mm) High Brightness 7 Segment Display features state-of-the-art elliptical LED Technology for superior daylight visibility over a 150 degree arc. 
This professional grade display is suitable for price signage, sports scoreboards and stop-watches, industrial timers and production  displays.
Features:
Higher Contrast  D8 HB LEDS are mounted on a black PCB for greater contrast.
Adaptable Interface
: Each D8 HB 300  is equipped with an Synchronous Serial Interface, line drivers and segment drivers.   Simple circuit modifcations allow users  to access the segments directly or via the on-board transitor drivers.
Support Products.  Kitstop is developing  a range of BDC to Decimal Decoders, De-Multiplexers,
and drivers.
Specification
Power:
5V DC at 1.5Amps (PCB can be adapted to 12V at 750mA) (full "8" displayed)
LEDs: 182pcs Red,  5000mcd Elliptical Diffused 150 degree visibility - (White wide angle LED on special order)
Character Size: 285mm x 160mm (PCB size 303mm x 175mm)

Buy Now:
(+ postage of $16.90)

D8 HB 400 16" (approx 400mm) High Brightness 7 Segment Display features state-of-the-art elliptical LED Technology for superior daylight visibility over a 150 degree arc.
This professional grade display is suitable for price signage, sports scoreboards and stop-watches, industrial timers and production displays.
Features:
Higher Contrast D8 HB LEDS are mounted on a black PCB for greater contrast.
High LED density
Adaptable Interface: Each D8 HB 400 is equipped with a Synchronous Serial Interface, line drivers and segment drivers. Simple circuit modifcations allow users to access the segments directly or via the on-board transistor drivers.
Support Products. Kitstop BDC to Decimal Decoders, De-Multiplexers and drivers.
Specification
Power:
12V DC at 1.5Amps  (full "8" displayed)
LEDs: 462pcs Red, 5000mcd Elliptical Diffused 150 degree visibility - (White wide angle LED on special order)
Character Size: 422mm x 222mm (PCB size 430mm x 250mm)

Buy Now:
(+ postage of $6.95)

MXA001 3" Ultra Bright 7 Segment Display. Dimensions: Display 46x75mm. PCB 63x86mm. Features: Ultra Bright LEDs for excellent outdoor visibility. Current drain at 12V per segment or decimal point 15mA. Total Drain 120mA. Price inc GST.  Add P & P     Also available as an indoor module MXA034 featuring Hi Brightness Red LEDs

Quantity:
Buy Now:
(+ postage of $8.50)

MXA002   5" Ultra Bright 7 Segment Display Dimensions: Display 72x126mm.  Features: Ultra Bright LEDs for outdoor visibility. Current drain at 12V per segment 30mA and 15mA for the decimal point. Total Drain 225mA. Current drain at 24V per segment or decimal point 15mA (total 120mA). Price inc GST . Add  P &  P               Available also as an indoor module MXA035 featuring High Brightness Red LEDs

Quantity:
Buy Now:
(+ postage of $8.50)

MXA003 7" Ultra Bright 7 Segment Display Dimensions; Display 100x 180mm. PCB 136x192mm.  Features: Ultra Bright LEDs for outdoor visibility. Current drain at 12V per segment 60mA and 15mA for the decimal point. Total Drain 435mA. Current drain at 24V per segment 30mA or decimal point 15 mA (total 225mA. Price inc GST. Add P & P                Available also as a wide angle viewing module MXA037 featuring Hi Brightness Red LEDs. 

Quantity:
Buy Now:
(+ postage of $8.50)

MXA004   9" Ultra Bright 7 Segment Display WOW!!! This unit is ideal for sports scoring and event timing display. Dimensions; Display 147.1x 229.8mm. PCB 161.6x240.7mm.  Features: Ultra Bright LEDs for outdoor visibility. Current drain at 12V per segment 60mA and 15mA for the decimal point. Total Drain 435mA. Current drain at 24V per segment 30mA or decimal point 15 mA (total 225mA. Price inc GST.  Add P & P               Available also as an indoor module MXA037 featuring High Brightness Red LEDs 

Quantity:
Buy Now:
(+ postage of $8.50)

MXA006   4 Digit 3" Ultra  Bright 7 Segment Display Dimensions; Display 4x 46 x 75mm. PCB 250x85mm.  Features: Ultra Bright LEDs for outdoor visibility. Current drain at 12V per segment 15mA and 15mA for the decimal point and colon. Total Drain 495mA.  Price inc GST. Add P & P              

Quantity:
Buy Now:
(+ postage of $5.60)

MXA007 Seven Segment Driver  Features: Suitable for use with MXA001,002,003 and 004 PCB Dimensions 59mmx50mm. Displays. Minimum 4.5V input voltage suitable for TTL drive. Common Cathode or Common Anode Drive.  Price inc GST. Add P & P

Quantity:
Buy Now:
(+ postage of $6.45)

MXA008 4 Digit Seven Segment Multiplexed Display Driver. Suitable for use with MXA 001, 002, 003, 004 and 005 displays. PCB Dimensions: 93x80mm. High impedance input suitable for microprocessor interface. Price inc GST. Add P & P

Quantity:
Buy Now:
(+ postage of $6.45)

The KSK008 DeMUX Board is designed to improve the brightness of multiplexed displays.  Most displays are addressed for only a fraction of the total display time.  The resultant brightness is often well below the full capability of the LED.  We recommend that you drive each digit with a "static" signal to maximise the brightness of the display.  The KSK008 De-Multiplexer" assembly is designed to allow you to do this.  

The process of switching LED Digits ON for very brief periods, and then turning them OFF as the others in the  series are switched on in turn. This is known as a "Multi-plexed" driver arrangement. 

This Kit will capture each "drive instruction" issued to the digit, and then hold that "drive instruction" ON full until a refresh instruction is issued. This is known as "De-multiplexing" (or "Demux" for short).

The KSK008  DeMux kit has been developed to specifically work with the Kitstop range of large LED Displays, however, other displays may be driven with suitable connection arrangements.
Features
Each KSK008 is equipped with jumper-selectable digit options from 1 to 6
Each display digit requires one de-MUX board.
12V DC. operation 
Each deMUX is fitted with an output connector and ample power to drive "parallel" digits with the same information. Very useful for "back-to-back" display boards.

Quantity:
Buy Now:
(+ postage of $16.50)

MXA025 4 Digit 3" Clock  High Brightness Display suitable for Outdoor use. Clock or timer mode selectable. Power fail protected with Battery Back-up circuit. Power requirement 12VDC 120mA - 15mA in power fail mode. Back-Up Circuit suitable for 3x1.2V 200-600mAH batteries. In clock mode the MXA025 will measure down to 1minute In timer mode the MXA025 will measure up to up to 99hrs 59 minutes and 59 seconds.  The driver can also be adapted to larger displays.   Price inc GST. Add P & P

Quantity:
Buy Now:
(+ postage of $16.50)

MXA026 6 Digit 3" Clock  High Brightness display suitable for Outdoor use. Clock or timer mode selectable. Power fail protected with Battery Back-up circuit. Power requirement 12VDC 120mA - 11mA in power fail mode. Back-Up Circuit suitable for 3x1.2V 200-600mAH batteries. In Clock mode the MXA026 will measure down to 1/100th second. In timer mode the MXA026 will measure up to up to 99Hrs 59minutes 59.99seconds  Price inc GST. Add P & P

Quantity:
Buy Now:
(+ postage of $8.50)

MXA058 "OPEN" SIGNBOARD  This flashing sign is measures 204mmx74mm. 12V DC  . Suitable for Shops, Queue   Indicators, Professional Offices. 240V operation.
Obsoleted item. Ask us for a special quote if you want more than 1 item !
Price inc GST$34.77 plus P & P

Quantity:
Buy Now:
(+ postage of $11.50)

MXA079 10" Wide Angled 7 Segment LED Display.   This unit is ideal for sports scoring and event timing display. Display Height 258mm. PCB 149.35x266.7mm.  Features: Each segment features 35 wide angled 600mcd LEDs for outdoor visibility. Current drain at 12V per segment 60mA and 15mA for the decimal point. Total Drain 435mA.

Quantity:
Buy Now:
(+ postage of $8.50)

FK174 5x7 LED Animated Chaser Module. This unit features a microprocessor based, fully addressable character and symbol set and may be end stacked to create large displays up to 48 columns of 5 rows.  Character height 35mm. The display characters are selected by push buttons and can be set to chase from left to right or right to left.  3V power Price includes GST.  Add P & P

Quantity:
Buy Now:
(+ postage of $6.40)

The MXA034 features a 3" LED, 7 segment digit, mounted on a 63mm x 85mm PCB.  This unit is suited to applications requiring wide angle viewing.  Each segment consists of 5 diffused 600mcd LEDs and a single LED for the decimal point.

Power requirement 12V @ 15mA per segment.  Total current for "8" display is 120mA.

Buy Now:
(+ postage of $8.50)

The MXA035 features a 5" LED, 7 segment digit, mounted on a 90mm x 140mm PCB.  This unit is suited to applications requiring wide angle viewing.  Each segment consists of 10 diffused 600mcd LEDs and 3 LEDs for the decimal point.

Power requirement 12V (or 24V selectable) 12V @ 30mA per segment.  Total current for "8" display is 225 mA plus decimal point of 15mA.   At 24V the total current is 120mA.

Buy Now:
(+ postage of $8.50)

The MXA036 features a 7" LED, 7 segment digit, mounted on a 136mm x 192mm PCB.  This unit is suited to applications requiring wide angle viewing such as sports scoreboards.  Each segment consists of 20 diffused 600mcd LEDs and 5 LEDs for the decimal point.

Power requirement 12V (or 24V selectable) 12V @ 60mA per segment.  Total current for "8" display is 435 mA plus decimal point of 15mA.   At 24V the total current is 225mA.

Buy Now:
(+ postage of $11.50)

The MXA037 features a 9" LED, 7 segment digit, mounted on a 161.60mm x 240.7mm PCB.  This unit is suited to applications requiring wide angle viewing.  Each segment consists of 20 diffused 600mcd LEDs and 5 LEDs for the decimal point.

Power requirement 12V (or 24V selectable) 12V @ 30mA per segment.  Total current for "8" display is 435 mA plus decimal point of 15mA.   At 24V the total current is 225mA.

Buy Now:
(+ postage of $12.50)

The MXA0078 is the latest in a growing range of jumbo sized 7 Segment LED Displays.  It features a digit size of 258mm - that's more than 10" and is  mounted on a PCB 149.35mm x 266.7mm.

Each segment consists of 35LEDs drawing 60mA per segment with 5 LEDs @15mA for the decimal point. 

Buy Now:
Make payments with PayPal - it's fast, free and secure!