PULSE WIDTH MODULATORS

MXA068 At 50Amps it's our most powerful PWM yet!!! 
The MXA068 is the lastest in Maxx Tronic's growing family of PWMs  It will find application in the field of HHO gas generation and at 50Amps 12V or 24V has enough reserve to power a decent sized DC motorized buggy.  It features a fixed 100Hz and a variable 400Hz to 3000Hz frequency range and a power control from 0 to 100%.

Value at $AU70.82  including GST plus $7.80 P and P  Buy Now

Now meet the rest of the family.

MXA 066 30Amp PWM Controller Possibly the most popular PWM of all time. This economical and powerful little unit controls 30Amps 12/24DC and runs at a modest 100Hz.  The mark/space ratio is adjustable from 0-100% VALUE at $AU25.56  including GST plus $6.45 P and P
Buy Now

FOR APPLICATIONS NEEDING LITTLE LESS POWER
 
MXA 033 15Amp PWM Controller In most motor driven positioning and control situations the MXA 033  will do the job. HHO experimenters using multiple bubbler cells in series have also found that the MXA 033 is well up to the job.  This economical and powerful little unit controls 15Amps 12/24DC and runs at a modest 100Hz.  The mark/space ratio is adjustable from 0-100%
Ask us how to upgrade this unit to a cool 20Amps or more. Economical  at $AU19.88  including GST plus $6.45  Pack and Post
Buy Now

NEW  RELEASE

FK804-M  40 Watt 12V PWM Controller Kit This is MOSFET version of our standard FK804 PWM.  Use it to control DC motors up to 3.2Amps and 12V lights to 42 Watts.  Experiment with LED dimming. Yours Now!! at $AU11.73  including GST plus $4.60 P and P
Buy Now

 NOTE!! ALL PRICES ARE SUBJECT TO CHANGE AT SHORT NOTICE. PLEASE CONFIRM WITH US ON
0432 502 755 or email mail@kitstop.com.au before placing your order.

HHO, PWM, Brown's (also known as Brown) Gas, Hydrolysis, Hydroxy Gas, Fuel from Water, Myths, Magic and Conspiracy Theories
To the uninitiated let us give this thumbnail sketch. Several years ago,  Yull Brown working in Sydney, Australia, proposed hydrolysing water using DC current to make a hydrogen/oxygen mixture called HHO as a fuel.

Although Brown suggested that HHO could be used to power automobiles, he opted to develop a mains-powered PWM-based hydrolysing unit as part of a gas cutting and welding system that eliminated the need for heavy and dangerous gas cylinders for oxygen and hydrogen.

Other "inventors" followed, some misguidedly suggesting that cars could be powered by HHO and all one would need would be water and a battery to start the process. (Unfortunately they ignored the simple fact that it takes more energy to separate the hydrogen and oxygen than we get back when we combine them).

On the other hand many HHO experimenters reported that, when they added the so-called HHO to the airfuel mixture in conventional vehicles, improvements of 20% or more in fuel economy were obtained. Diesel engines were said to be showing a 30% improvement  

At a time when fuel prices are rising, any significant increase in fuel economy is cause for research, discussion and debate.

Experimenters also noted that a lot of energy was being wasted as heat in the hydrolyser cells, boiling off the electrolyte. To control the amount of current through the water hydrolysing cells HHO buffs started using Pulse Width Modulators (PWM) to control the current drawn by the cells.
Of these PWMs  Maxx Tronic's MXA 066 would be the most popular world-wide.

ABOUT PULSE WIDTH MODULATORS (PWM) 
Pulse width modulators (PWM) are at the heart of most DC motor Controllers, Power Supplies and HHO hydrolysers.
Their efficiency is due to the fact that,  instead of resitively controlling the flow of current into a load, they control the load's AVERAGE current by turning the current on and off at differing ratios.  That is, controlling or modulating  the length of the ON pulse. thus the name pulse width modulation or PWM.  
Why are PWMs so efficient? 
By turning the current switching devices (usually MOSFET Transistors) hard on the effective resistance of the transistor is nearly zero so very little energy is lost through resistive heating.  When the MOSFET(S) is hard OFF no current flows so, again, there is no heating.  The only transistor heating that is generated is during the transition times of turning ON and again when turning OFF, so it is important to minimize the time that it takes for the transistors to change state and that requires well designed drive electronics.

WARNING!! There are a few PWMs out there that are using the MXA066 name and design without permission.  Please ensure that you are buying the genuine Maxx Tronic MXA 066 - If in any doubt call us for verification.

KITSTOP IS PLEASED TO PROVIDE TEST UNITS AT CONCESSIONAL RATES FOR SCIENTIFCALLY CONDUCTED EXPERIMENTATION AND RESEARCH INTO IMPROVING FUEL ECONOMY USING HHO INJECTION.  


There's More To Come in the world of PWM : Upverters, Emergency Lighting Circuits, Battery Subsitutes